Troubleshooting (cont.) – Audiovox 1525 User Manual
Page 18

Weak or no
Weak batteries
Charge or replace batteries
signal received
Channel and privacy
Adjust the transceiver’s
code not set the same
settings to match those
as target transceiver
settings of the target
transceiver
Volume level too low
Increase volume level
PTT Button inadvertently
Release PTT Button
depressed
Excessive radio interference
Change to a different
on a particular channel
channel
Obstruction of radio signal
Avoid operating in or near
large buildings or vehicles
Unit beeps, but
Batteries extremely
Charge or replace batteries
will not function
discharged
when turned on
Reception of
CTCSS privacy mode
Turn on the CTCSS privacy
unwanted signals
not on
mode and set code number to
match the setting of the
target transceiver.
Interference from
Turn the devices off or move
electronic devices such
farther away from them.
as computers or TVs
ScErr Displays
No channels selected on the
Select 2 or more channels
when pressing
scan list.
to the scan list.
scan
PrErr when
No channels selected on the
Select 2 or more channels
accessing priority
scan list.
to the scan list.
channel selection
mode
18
Troubleshooting (Cont.)
Problem
Possible cause
Correction