Altinex Compact Analog Interfaces VA6804SX - Manual (Page 3)

INTERFACES
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
VA6803SX/VA6804SX/VA6805SX/DA1926AV
Interface. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your VA6803SX/VA6804SX/
VA6805SX/DA1926AV and to prevent fire and
shock hazard. Please read them carefully and heed
all warnings.
1.1. GENERAL
•
There are no user serviceable parts inside.
Only qualified ALTINEX service personnel must
perform all service on the VA6803SX/
VA6804SX/VA6805SX/DA1926AV.
1.2. SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE VA6803SX/ VA6804SX/
VA6805SX/DA1926AV
•
Maximum operating ambient temperature is 35
(degrees C).
•
Never restrict the airflow through the devices’
fan or vents.
•
When installing equipment into a rack,
distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.
•
Connect the unit to a properly rated supply
circuit.
•
Reliable Earthing (Grounding) of Rack-Mounted
Equipment should be maintained.
1.3. INSTALLATION
•
For best results, place the
VA6803SX/VA6804SX/VA6805SX/DA1926AV
Interface on a flat, level surface in a dry area
away from dust and moisture.
•
To prevent fire or shock, do not expose this unit
to rain or moisture.
•
To turn off the main power, be sure to remove
the adapter from the wall. The power outlet
socket should be installed as close to the
equipment as possible, and should be easily
accessible.
•
Do not place the VA6803SX/ VA6804SX/
VA6805SX/DA1926AV Interface in direct
sunlight, near heaters or heat radiating
appliances, or near any liquid.
•
Exposure to direct sunlight, smoke, or steam
can harm internal components.
•
Handle the VA6803SX/ VA6804SX/
VA6805SX/DA1926AV Interface carefully.
Dropping or jarring can damage internal
components.
•
Do not place heavy objects on top of the
VA6803SX/VA6804SX/VA6805SX/DA1926AV.
•
Do not pull the adapter or any cable that is
attached to the VA6803SX/ VA6804SX/
VA6805SX/DA1926AV Interface.
•
If the VA6803SX/ VA6804SX/ VA6805SX/
DA1926AV is to be mounted to a table or wall,
use only ALTINEX made mounting
accessories, such as brackets (MB1001) and
cables for optimum setup.
•
If the VA6803SX/ VA6804SX/ VA6805SX/
DA1926AV Interface is not used for an
extended period, disconnect the adapter from
the wall to avoid fire, shock, and loss of power.
1.4. CLEANING
•
Unplug the VA6803SX/ VA6804SX/
VA6805SX/DA1926AV adapter before
cleaning.
•
Clean surfaces with a dry cloth. Never use
strong detergents or solvents such as alcohol
or thinner. Do not use a wet cloth or water to
clean the unit.
1.5. FCC / CE NOTICE
•
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.