Panasonic DMRE65 - Manual (Page 17)

17
RQT7303
Re
cor
d
ing
∫ To specify a time to stop recording—One Touch
Recording
During recording
Press [ ¥ REC] to select the recording time.
Each time you press the button:
≥This does not work during timer recordings ( ➡ page 19) or while
using Flexible Recording ( ➡ page 18).
To stop recording partway
Press [
∫].
Off Timer
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(
➡ page 42, “Off Timer”).
Depending on the content being recorded, the recording times may
become shorter than indicated.
(Unit: hour)
§ When “Recording Time in EP Mode” is set to “EP (6H)” in the
SETUP menu.
The sound quality is better when using “EP (6H)” than when using
“EP (8H)”.
[Note]
When recording to DVD-RAM using EP (8H) mode, play may not be
possible on DVD players that are compatible with DVD-RAM. In this
case use EP (6H) mode.
FR (Flexible Recording Mode)
The unit automatically selects a recording rate between XP and EP
(8H) that will enable the recordings to fit in the remaining disc space
with the best possible recording quality.
≥You can set when programming timer recordings.
≥All the recording modes from XP to EP appear in the
display.
[RAM]
Press [AUDIO].
≥If you change the sound setting while recording, the recorded
sound will also change.
[DVD-R]
[RAM] (When recording sound in LPCM)
Select the audio (Main or SAP) in “Select
MTS” in the SETUP menu (
➡ page 43).
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00
^"""""""""""" Counter (cancel) ,"""""""""""}
Recording modes and approximate
recording times
DVD-RAM DVD-R
(4.7 GB)
Mode Single-sided
(4.7 GB)
Double-sided
(9.4 GB)
XP (High quality) 1 2 1
SP (Normal) 2 4 2
LP (Long play) 4 8 4
EP (Extra long play) 8 (6 § ) 16 (12 § ) 8 (6 § )
EP (6H) §
EP (8H)
LP
SP
XP
Recording time
Pict
ure quali
ty
XP
SP
CH
LP
EP
Selecting audio to record
[.
l
l
l
l
l
a-
Stereo: Main audio (stereo)
≥If the broadcast is “MonoiSAP”, audio will be
monaural even if you select Stereo mode.
v
SAP: Secondary audio program (SAP)
≥If recorded in SAP mode, main audio is also
recorded.
v
Mono: Main audio (monaural)
≥Select “Mono” if reception is poor during a stereo
broadcast.
CH 12
Stereo
No disc
((
e.g., “Stereo” is selected
“((” appears when the unit is
receiving the audio type you
selected.
7303en.book 17 ページ ２００４年５月３１日 月曜日 午前９時３２分