Panasonic TYSP65P7WK - Manual (Page 4)

4
English
• After preparing the ends of the speaker cables
for the right speaker, connect them as shown
in the illustration.
• Connect the speaker cables for the left
speaker in the same way.
• The red cable is for the (+) polarity and the
black cable is for the (-) polarity. Do not
connect the cables to the wrong polarities.
5. Connect the speaker
cables.
Preparing the ends of the
speaker cables
Remove while
twisting
1. Press down on the lever.
2. Insert the cable.
3. Release the lever.
1. Push down the lever.
3. Return the lever to its
normal position.
2. Insert
the cable.
Adjust display and speaker height when
fastening the A and B brackets.
4. Catch the B bracket claws
in the A brackets (plasma
display side).
Fasten the A and B
brackets with bracket
mounting screws.
Note
The left and right brackets are different, so
please check carefully when mounting.
Caution
Bracket
mounting
screws
Rear of Plasma Display
Mount A
bracket
Mount B
bracket
Installation