Panasonic DVDS1 - Manual (Page 13)

RQTC0074
13
“VIDEO” tab
SETTING STATE Display the current setting of the items below
TV ASPECT
Choose the setting to
suit your television and
preference.
To select how to show
images made for 16:9
aspect screens on a 4:3
aspect television.
4:3PAN&SCAN
4:3LETTERBOX
4:3ZOOM
To select how to show
images made for 4:3 aspect
screens on a 16:9 aspect
television.
16:9NORMAL
16:9SHRINK
16:9ZOOM
•
•
•
•
•
•
4:3PAN&SCAN
The sides of the picture are cut off so it fills
the screen (unless prohibited by the disc).
4:3LETTERBOX
Picture is shown in the letterbox style.
4:3ZOOM
If you select 4:3PAN&SCAN and there is no effect,
select this and the image will display in 4:3PAN&SCAN.
16:9NORMAL
Stretches a 16:9 aspect ratio image
horizontally.
16:9SHRINK
Displays a 4:3 aspect ratio image in the
center of the screen.
16:9ZOOM
Adjusts the horizontal width to display a full
screen image in 16:9 aspect ratio.
TV TYPE
Select to suit the type of television.
STANDARD CRT LCD PROJECTION PLASMA
STILL MODE
Specify the type of picture
shown when paused .
AUTO
FIELD: The picture is not blurred, but picture quality is lower.
FRAME: Overall quality is high, but the picture may appear blurred.
BLACK LEVEL
Change the black level of the
picture if you connected a television
through the COMPONENT VIDEO
OUT terminals.
LIGHTER: When connected through VIDEO OUT or S
VIDEO OUT.
DARKER: When connected through COMPONENT
VIDEO OUT.
VIDEO OUT (I/P)
Select “PROGRESSIVE”
only if connecting to
a progressive output
compatible television.
INTERLACE PROGRESSIVE
When you select “PROGRESSIVE”, a message screen
will appear.
For progressive output, press [e] and then press [ENTER].
Press [RETURN] to cancel.
•
•
n
Changing the player settings
Changing the player settings
1
Shows Setup menu.
Select
Register
2
Select the tab.
3
Select the item. Make the settings.
4 5
Press to exit.
Select Select
Register
The settings remain intact even if you switch the unit to standby.
Underlined items are the factory preset.
“DISC” tab
SETTING STATE Display the current setting of the items below
AUDIO
Choose the audio language.
ENGLISH FRENCH SPANISH ORIGINAL ] 1
OTHER ---- ] 2
SUBTITLE
Choose the subtitle
language.
AUTO ] 3 ENGLISH FRENCH SPANISH OTHER ---- ] 2
MENUS
Choose the language for
disc menus.
ENGLISH FRENCH SPANISH OTHER ---- ] 2
RATINGS
Set a ratings level to limit
DVD-Video play.
Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings levels.
1 to 7
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video
exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
PASSWORD
Change the password for
“RATINGS” (è above).
1. Select “CHANGE” and press [ENTER].
2. Enter the current password with [e r] and [q], then
press [ENTER].
3. Enter the new password with [e r] and [q], then
press [ENTER].
If “VERIFY” is displayed, please verify the password
and insert it again.
•
•
n
SETUP SETUP
ENTER
MENU TOP MENU
FUNCTIONS RETURN
ZOOM REPLAY
QUICK
SETUP CM SKIP
QUICK OSD SURROUND ADVANCED MODE PLAY
SLOW/SEARCH
Register
ENTER ENTER ENTER