ACR Electronics ZE-NES14 User Manual

Page 11

ZE-NC514

BASIC OPERATIONS

DISPLAY SYSTEM TIME

■

Press and hold the [DISP] key on the front panel to switch the display information

between system time and playing source when the TFT monitor is closed.

USING THE TFT MONITOR

Open/Close monitor

■

Press the [OPEN/CLOSE] key on the front panel or remote control to push the display

panel out or in.

Change the monitor tilt angle

■

Due to the inherent character of LCD panels, you will get different vision impressions

when you watch it from different angles. The display angle of this unit can be changed;
hence you can select the best angle where you can get the best vision impression.

■

Press the [TILT] key on the display panel or the remote control to adjust the tilt angle one

step at a time.

■

Press and hold the [TILT] key on the display panel or the remote control to adjust the tilt

angle continuously.

Change aspect ratio

■

Press the [WlDE] key on the display panel or remote control to adjust the aspect ratio.

lmage setting

1. Enter image setting mode
■

Press the [PIC] key on the remote control.

2. Select one item to adjust
■

Press the []/[] keys on the remote control.

3. Adjust the value
■

Press the []/[] keys on the remote control.

4. Exit image setting mode
■

To exit image setting mode, repeat the first step or stop operation for some seconds.

RESET THE UNIT

■

lf the unit can not work correctly, you should reset the unit by pressing the [RESET]

button on the front panel.