Panasonic CUG95KE - Manual (Page 11)

▲
9
ENGLISH
Remote control
Operating the remote control
● The maximum distance at which signals can be
received is about 10 m.
● Aim the remote control at the signal receptor on
the room air conditioner when operating.
● Make sure that the signal path is not obstructed.
Batteries
POWER LOW HIGH SLEEP TIMER
POWERFUL
POWER MONITOR
Inserting batteries
(2 pcs R03 dry-cell batteries)
The batteries can be used for approximately one
year.
Observe the following when
replacing the batteries
● Replace the batteries with 2 new batteries of
the same type.
● Do not use rechargeble batteries (Ni-Cd),
because they are different from standard
dry-cell batteries in shape, dimensions and
performance.
● If the unit is not going to be used for an
extended period of time, remove the batteries
from the remote control.
1 Gently press the place
marked OPEN and
slide the cover towards
you.
2
Be sure that the e
and r directions are
correct.
● Confirm that the display is flashing 12:00 PM. If the
display does not appear when the batteries are
inserted, remove them and re-insert.
● To prevent battery exhaustion , set the current time
(CLOCK) immediately.
PM
Setting the clock
1
2
3
Press the Clock button.
PM flashes and 12:00 lights up.
Press or to set the current
time.
Press continuously for fast
forwarding and for fast reversing.
Press the Clock button.
AM or PM lights up.
PM
PM
Notes
● Do not throw or drop the remote control. Do not
let it get wet.
● Certain types of fluorescent lamps may affect
signal reception. Consult your dealer.
PM