How to use the ferrite core, Connections, For 80 inch model – Panasonic TH50LFC70E User Manual

Page 10

English

Connections

For 80 inch model

Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.

AC cord fi xing

Unplug the AC cord

Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet ¿ rst.

Using the clamper
Secure any excess cables with clamper as required.

Note:
One clamper is supplied with this unit. In case of securing cables at four positions, please purchase it separately.
If you need more clampers, purchase them from your dealer. (Available from the customer service)

Attach the clamper

To remove from the unit:

Keep pushing
both side snaps

hole

Bundle the cables

snaps

hooks

Set the
tip in the
hooks

To loosen:

Keep
pushing
the knob

knob

Insert the clamper
in a hole.

How to use the Ferrite core

Installing the Ferrite core

Pull back the tabs
(in two places)

Open the
Ferrite core

Route the cable
through and close

Fix the Ferrite core
with the cable tie

Stereo mini plug (M3)

PC with DVI-D
video out

Shared with PC IN.

Less than
5 cm

Ferrite core
(supplied)

DVI-video cable (Within 5 m)

This manual is related to the following products:

TH80LFC70E