Panasonic ES2401 - Manual (Page 4)

44
the on/off switch to “1” position
for low speed, and “2” position
for high speed setting.
To reduce the risk of injury to
cuticles only use the cuticle
attachment with “1” position (low
speed). “2” position (high speed)
is recommended for smoothing
and finishing. Filing can be safely
done on either speed.
For best results, please place your
fingers on a table so that they
will not move during operation.
Smart ways to use
Filing (Fig. 4)
Use this attachment to shape your
nails.
Move the switch to the “1” or “2”
position then hold the file to your
nail at a 45 o angle as shown.
Cuticle care (Fig. 5)
Use this attachment to push the
cuticle.
Move the switch to the “1” position
and place the side of the tip to the
cuticle.
NOTE:
Although it is best to file the nails
while they are dry, cuticles respond
best immediately after bathing or
soaking in warm water.
Coarse (pink) (Fig. 6)
Use this attachment to smooth
ridges and imperfections on the nailʼs
surface.
Move the switch to the “2” position
before placing the pink side against
Parts identification
(Fig.1)
On/off switch
0 ＝ off
1 ＝ low speed
2 ＝ high speed
Battery cover
Attachment stem
Filing attachment
Cuticle care attachment
Polishing attachment
① Coarse (pink)
② Finishing (white)
Soft pouch
Replacement finishing (white)
seals × 1 piece
BEFORE USAGE PLEASE READ
THE MANUAL CAREFULLY AND
COMPLETELY.
Inserting the batteries
(Fig. 2)
① Remove the battery cover.
② Insert two AAA (LR03) alkaline
batteries.
③ Replace the battery cover.
• Make sure the batteries match the
+ and – markings.
• Do not mix old and new batteries or
use rechargeable batteries.
• Remove the batteries when not
using the product for a long time.
How to use
1) Insert the attachment on the
attachment stem until it clicks in
place. (Fig. 3)
Please refer to “Smart ways to
use” to select the appropriate
attachment.
2) Turn the product on by sliding