Panasonic SCPT170 - Manual (Page 4)

4
RQ
TX02
41
Quick Start
Gu
ide
Getting S
tarted
ENGL
ISH
Preparation
≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥ For assembly, use a Phillips-head screwdriver (not included).
≥ You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
Caution
Do not stand on the base. Be cautious when children are near.
step 1 Assembling the front speakers [PT175]
Speaker assembly option
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 26.
2 Front speakers 2 Stands (with cable) 2 Bases 8 Screws
2
1
2
1
Slide into the groove.
Tighten securely.
Position the cable
between the ridges.
Press into the groove.
Leave about 90 mm.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Push!
Insert the wire fully.
i: White
j: Blue
Tighten securely.
Leave about
100 mm.
You can remove and use the
cable from the stand. To reattach
the cable, refer page 26.
Thread the speaker cable through
the base. Attach the speaker.
Slide into the
groove.
Preventing the speakers from falling
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the
speaker
Screw eye
(not included)
Wall
Approx.
150 mm
DO
NOT
4
SC-PT170-175EP-RQTX0241-R_eng.book Page 4 Wednesday, February 4, 2009 12:19 PM