Panasonic SCPMX2 - Manual (Page 9)

RQTV0215
9
9
ENGLISH
FM/AM radio
Manual tuning Manual tuning
1 Press [FM/AM/MUSIC PORT] repeatedly to select
“FM” or “AM”.
2 Press [PLAY MODE] to select “MANUAL”.
3 Press [ / 4/1] or [ /¡/¢] to select the
frequency of the required station.
“ ST ” is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [ /
4/1] or [ /¡/¢] for a moment until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [ / 4/1] or [ /¡/¢]
once again.
To improve FM sound quality To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO”
disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off “MONO” for normal listening.
RDS broadcasting RDS broadcasting
Enable you to display the name of a broadcasting station or
a program type.
Press [DISPLAY] to display:
Station Name (PS) Program Type (PTY)
Frequency display
RDS displays may not be available if reception is poor.
Program type displays
NEWS VARIED FINANCE COUNTRY
AFFAIRS POP M CHILDREN NATIONAL
INFO ROCK M SOCIAL A OLDIES
SPORT M.O.R.M RELIGION FOLK M
EDUCATE LIGHT M PHONE IN DOCUMENT
DRAMA CLASSICS TRAVEL TEST
CULTURE OTHER M LEISURE ALARM
SCIENCE WEATHER JAZZ
M.O.R.M = “Middle of the road music”
Memory preset Memory preset
Up to 20 stations can be set in the FM band and 15 stations
in the AM band.
Preparation
Press [FM/AM/MUSIC PORT] repeatedly to select “FM” or
“AM”.
Automatic presetting Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting Manual presetting
1 Press [PLAY MODE] to select “MANUAL”.
2 Press [ / 4/1] or [ /¡/¢] to tune to the
required station.
3 Press [PROGRAM].
4 Press numeric buttons to select a channel.
The station occupying a channel is erased if another
station is preset in that channel.
5 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station Selecting a preset station
Press numeric buttons to select the channel.
For two-digit channel, press [
h10], then the two digits.
OR
1 Press [PLAY MODE] to select “PRESET”.
2 Press [ /
4/1] or [ /¡/¢] to select the
channel.
AM allocation setting AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
To change the step from 9 kHz to 10 kHz
1 Press [FM/AM/MUSIC P.] to select “FM”.
2 Press and hold [FM/AM/MUSIC P.].
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
3 Continue to hold down [FM/AM/MUSIC P.].
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After the setting is changed, any previously preset
frequency will be cleared.
PMX2_E_EN.indd 9 PMX2_E_EN.indd 9 3/7/07 2:56:20 PM 3/7/07 2:56:20 PM