Asus Motherboard PR-DLSR533 - Manual (Page 40)

2-14 Chapter 2: Hardware information
2.7.2 Jumpers
2. SCSI setting (3-pin J5)
Set this jumper to pins 1-2 to enable or disable the onboard SCSI
controller. Set to pins 2-3 to disable the onboard SCSI controller.
1. Keyboard power setting (3-pin J1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the system
when you press a key on the keyboard. Set to pins 1-2 (+5V) if you
wish to disable this feature.
PR-DLSR533
®
PR-DLSR533 Keyboard Power Setting
J1
3
2
1
2
+5VSB
(Default)
+5V
PR-DLSR533
®
PR-DLSR533 SCSI Setting
J5
(Default)
Enable Disable
1
2
3
2