Panasonic DMPBD75EG - Manual (Page 6)

6
VQT3A95
C onnections and settin gs
STEP 1 : Connecting to
a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
STEP 2 : Connecting to
an amplifier/receiver
∫ Via an HDMI AV OUT terminal
(High quality)
≥ Set “HDMI Audio Output” to “On”
([HOME]>“Setup”>“Player Settings”>“TV / Device
Connection”>“HDMI Connection”).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (> 10).
HDMI IN
HDMI cable
≥ Set “HDMI Audio Output” to “On”
([HOME]>“Setup”>“Player Settings”>“TV / Device
Connection”>“HDMI Connection”).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver ([HOME]>“Setup”>“Player
Settings”>“Sound”).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (> 10).
≥ When using the TV or amplifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV’s sound by
amplifier/receiver it is also required to connect the
amplifier/receiver and TV using an optical digital cable.
HDMI IN
HDMI IN
HDMI IN
(ARC)
HDMI OUT
(ARC)
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
(6)
VQT3A95 ~Body_mst.fm 6 ページ ２０１１年１月７日 金曜日 午後３時１０分