Panasonic NVGS80EP - Manual (Page 27)

Record mode
27
LSQT1130
Wide/4:3 Function
This allows you to record images compatible with
wide-screen TVs.
Wide Function
Images are recorded with a 16:9 aspect ratio.
4:3 Function
Images are recorded with a 4:3 aspect ratio.
≥Set to Tape Recording Mode.
1 Wide Function
Set [BASIC] >> [REC ASPECT] >> [16:9].
4:3 Function
Set [BASIC] >> [REC ASPECT] >> [4:3].
ª To Cancel the Wide/4:3 Function
Wide Function
Set [BASIC] >> [REC ASPECT] >> [4:3].
4:3 Function
Set [BASIC] >> [REC ASPECT] >> [16:9].
≥The default setting is [16:9].
≥In the wide-screen mode, the menu screens,
operation icons and other screen displays
appear horizontally oriented.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥If still pictures recorded with a 4:3 aspect ratio
are played back when [TV ASPECT] is set to
[16:9], part of the operation icons and other
displays will appear on the black bands on the
left and right of the picture.
≥Concerning the TV to be connected and TV
used for playback.
≥When playing back images taken by this unit
on a TV screen, change the setting
established by Tape playback mode [SETUP]
>> [TV ASPECT] to match the aspect ratio
(4:3 or 16:9) of the TV monitor to be
connected. (
-33- )
≥Depending on the settings of the TV
connected, the images may not be displayed
properly. For more information, please read
the operating instructions for the TV.
Image stabilizer function
Reduces the image shaking due to hand
movement when recording.
≥Set to Tape Recording Mode.
1 Set [ADVANCED] >> [O.I.S.] >> [ON].
ª To cancel the image stabilizer function
Set [ADVANCED] >> [O.I.S.] >> [OFF].
≥In the following cases, the image stabilizer
function may not work effectively.
≥When the digital zoom is used
≥When the camera is shaken greatly
≥When you record a moving subject while
tracking it
Guideline function
View the slope and the balance of the image
while recording.
You can check if the image is level while
recording motion pictures. The function can also
be used to estimate the balance of the
composition.
≥Set to Tape Recording Mode.
1 Set [ADVANCED] >> [GUIDE LINES] >>
[ON].
ª To Cancel the Guideline Function
Set [ADVANCED] >> [GUIDE LINES] >> [OFF].
≥The guide lines do not appear on the images
actually recorded.
LSQT1130_ENG.book 27 ページ ２００６年１２月１６日 土曜日 午後８時４５分