Panasonic NVGS280 - Manual (Page 8)

8
VQT0T18
Install/Connection
(except for NV-GS27)
Installing USB Driver
Install this when your OS is Windows XP SP1, or Windows 2000
SP4.
(When your OS is Windows XP SP2, installing USB Driver is not
needed.)
USB Driver is needed to be installed when you connect the movie
camera to the PC with the supplied USB cable and use
SweetMovieLife/MotionDV STUDIO or Web Camera.
DirectX 9.0b is installed in your PC if it is not installed beforehand.
Applications which are compatible with older version of DirectX may
not operate properly by installing DirectX 9.0b. In this case, consult
the manufacturers of the applications disabled.
1 Insert the supplied CD-ROM into the personal
computer’s CD-ROM drive.
≥Quit all applications.
≥The [Setup Menu] screen appears.
2 Click [USB Driver].
≥The set up program starts running.
3 You may be required to install DirectX 9.0b
depending on the environment of the personal
computer. In this case, click [Yes] to install it.
≥Reboot the computer after DirectX is installed.
≥Do not take out the CD-ROM.
4 Finish installation by following the on-screen
instructions.
≥Click [Next] and proceed with installation.
≥After completing the installation, click [Finish].
≥Reboot the computer to finish installing USB Driver.
Depending on your personal computer, one of the
following screens may appear.
1 Your personal computer does not support USB 2.0 (High-Speed)
so the video on tape cannot be imported from the video camera
to the personal computer with the USB cable.
≥You can use the WEB Camera function.
2 The personal computer has recognized a USB 2.0 (High-Speed)
driver other than the Microsoft driver. Update the driver to make
sure that it operates properly. (
l 11)
3 The USB 2.0 (High-Speed) driver may not be recognized
correctly. Update the driver to make sure that it operates properly.
(
l 11)
Cancel
2
3
1
2
3
VQT0T18EP-ENG.book 8 ページ ２００５年１１月２８日 月曜日 午後９時０分