Panasonic DMWFL360E - Manual (Page 25)

25
VQT1B11
≥ The actual flash intensity may vary when the flash intensity adjustment
value has been set on both the digital camera and the unit.
≥ If [TTL AUTO], [AUTO] or [FP TTL AUTO] is selected, the unit fires at the
adjustment value obtained by adding together the adjustment values set
on the digital camera and the unit. (The value set on the unit only is
displayed as the flash intensity adjustment value.)
[Example]
≥ If [MANUAL] or [FP MANUAL] is selected, the unit fires at the
adjustment value set on the unit only.
[Example]
Unit Digital camera
Adjustment value setting +0.3
+0.3
(+1/3 EV)
Unit’s flash intensity
adjustment value display
+0.3
Actual adjustment value used
for firing
+0.6
(+2/3 EV)
Unit Digital camera
Adjustment value setting +0.3
+0.3
(+1/3 EV)
Unit’s flash intensity
adjustment value display
+0.3
Actual adjustment value used
for firing
+0.3
(+1/3 EV)
VQT1B11.book 25 ページ ２００６年８月３１日 木曜日 午後４時３６分