Auto Page RS-1000 - Manual (Page 9)

RS1000 OP 1/07 9
D- P3- 1. “TIMER / CLOCK” SETTINGS: Example: set the clock to 08:20PM
Spin down the switch
to page 3.
Press button 1 and
the ”hours” digit flashes
for adjusting. Press button 2 to set
the ”hours” digit to “08”.
This can also be done
with the jog shuttle.
Press button 1 and
the ”minutes” digit
flashes for adjusting.
Press button 2 to set
the “minutes” digit to
“20”. This can also be
done with the jog
shuttle.
Press button 1 and
the ”A” digit flashes for
adjusting. AM or PM. Press button 2 to set
the “P”. Press button 3 and the
setting is completed.
D- P3- 2. “ALERT ALARM TIMER” SETTING: Example set alert alarm timer to 06:30A
Note: When alert alarm timer trigger press any button to stop the beeper.
Spin down the switch
to page 3
Press button 2 and
the ”hours” digit flashes
for adjusting. Press button 2 to set
the ”hour” digit to “06”.
This can also be done
with the jog shuttle. Press the button 1 and
the ”minutes” digit
flashes for adjusting.
Press button 2 to set
the ”minute” digit to
“30”. This can also be
done with the jog
shuttle. Press button 3 to set
the alert alarm timer
and the icon will
flash on the main page.
Push the button
While the icon is
flashing or when alert
alarm timer trigger, the
screen will display the
alert alarm timer.
Press button 2 to turn
OFF the alert alarm
timer or press any
button to stop the alarm
while alert alarm timer
is triggered.