Panasonic ESST25 - Manual (Page 14)

14
Cleaning the shaver
1. Remove the shaver from the charging stand
[C].
2. Apply some hand soap and some water to
the outer foil.
• Close the cleaning shutter.
3. Turn the shaver on.
2
▼
There are two ways to clean the shaver, depending on
the actual dirt level.
▼ ▼
▼ ▼
To remove light dirt To remove heavy dirt
4. Slide the cleaning shutter
[A4] until it clicks.
5. Clean the outer foil
section [A] with running
water.
6. Turn the shaver off.
• Rinse with water and
shake up and down
several times to remove
the water.
4. Turn the shaver off after
10 – 20 seconds.
5. Remove the outer foil
section [A] and turn the
shaver on.
6. Clean the shaver and the
outer foil section [A]
with running water.
• Rinse with water and
shake up and down
several times to remove
the water.
• Be careful not to hit the main body on the sink or any other
object while draining the water. Failure to do so may cause
malfunction.
▼ ▼