14 pci/104+ connectors (uno-1170e only), Pci-104 voltage jumper settings, Figure 2.7: rs-422/485 jumper settings – Advantech UNO-1170E User Manual
Page 25: Pci/104+ connectors (uno-1170e only), Figure 2.7:rs-422/485 jumper settings
17
2.14 PCI/104+ Connectors (UNO-1170E only)
UNO-1170E supports up to two PCI/104+ cards. The cards will be
installed on connector noted "CN3-A" and "CN3-B". Please check your
PC/104+ card support voltage to adjust the jumper on CN4.
Jumper Setting for +3.3V example:
Figure 2.7: RS-422/485 Jumper Settings
Table 2.8: PCI-104 Voltage Jumper Settings
Voltage
Jumper close position setting
+5V
1-2
+3.3V
2-3
closed 2-3
This manual is related to the following products: