Printing, Power sources, Getting started – Panasonic RFD10EB User Manual
Page 4: Using the household mains socket, Using the batteries (not supplied), Dab operation
4
R
Q
TN
01
73
4
Power sources
Using the household mains socket
Connect the AC mains lead firmly to the unit and the
household mains socket.
Note:
• Do not use an AC mains lead from other equipment.
• This unit consumes a small amount of power when it is in
standby mode. Disconnect the power supply if you do not
use the unit.
Using the batteries (not supplied)
Use alkaline or manganese batteries.
Install the batteries so that the poles (+ and –) align with
those in the unit.
This unit will use the batteries as the power source when
you disconnect the AC mains lead. The battery indicator
will light up.
The battery indicator shows the battery levels.
Note:
• The unit switches on after you insert the batteries.
• When the battery indicator “
” begins flashing, replace all
4 of the batteries.
• After the battery indicator flashes for 10 seconds, the unit
will switch off automatically.
Getting started
1
Extend the antenna.
2
Press [1] to switch on the unit.
The first time you switch on the unit, it will enter DAB
mode and automatically scan for stations. It sets the time
and date (if data is available) and starts playing the first
station it finds.
Note:
In standby mode, the unit shows the time and date (only when
the unit is powered by AC).
DAB
DAB (Digital Audio Broadcasting) is a procedure of
broadcasting the radio digitally. It gives less interference
and better sound quality.
This unit supports DAB in “BAND III” bands.
DAB operation
The first time you enter DAB mode, or if the station list is
empty, the unit will start the full scan and memorise the
stations.
You can perform the full scan procedure when there is a
new station or a station becomes available.
1
Press [BAND] to select “DAB”.
2
Press [MENU] to select “Full scan” and then press
[ENTER] to start full scan.
To cancel, press [MENU].
█
Remove unavailable listed stations
This unit indicates those stations that are closed or no
longer available with a question mark in front of the
station name. You can remove these stations from the
station list.
1
Press [MENU] and then turn [ TUNE/SELECT ] to
select “Prune”.
2
Press [ENTER].
3
Turn [ TUNE/SELECT ] to select “Yes” and then
press [ENTER].
To cancel, select “No”.
1
2
3
4
R14/LR14, C
Press towards
while
inserting the battery.
Number of stations found
rf-d10eg.book Page 4 Friday, January 3, 2014 4:54 PM
printing