Panasonic TYFB7SD - Manual (Page 7)

7
PC IN
SLOT1 SLOT2 SLOT3 SLOT3
SD SDI
SD SDI
OUT
IN
Slot Nos. of the display unit that are compatible with terminal board attachments
Connection
2 slots model Slot1 , Slot2
3 slots model Slot1 , Slot2 (Slot3 is not compatible)
Business digital
VCR
Back view of the Display
English
MONITOR
Applicable input signals
1 525(480) / 59.94i 59.94 2:1 Interlace 15.734 27 1440 1716 486 525
2 625(575) / 50i 50 2:1 Interlace 15.625 27 1440 1728 576 625
Signal format
fV
(Hz)
fH
(kHz)
Dot clock
(MHz)
Number of
active pixels
Total number
of pixels
Total number
of lines
Number of
active lines
Scanning format
Video signal
• Recommended cable
75 Ω coaxial cable 5C-2V
• Maximum extension length: 200 m,
when using the above
recommended cable
• Equipment with SD-SDI
output capability
(Examples) professional-use
or broadcast digital VCRs, pro-
fessional-use monitors (CRT,
LCD, PDP)
• Equipment with SD-SDI
input capability
(Examples) professional-
use or broadcast digital
VCRs, professional-use
monitors (CRT, LCD, PDP)
Notes:
(1) Additional equipment and cables shown are not supplied with this set.
(2) Currently there is no support for embedded audio.
* SMPTE294M (525p/625p) indication is not included in the serial digital interface (SDI) transmission.