Panasonic WHMDF09C3E8 - Manual (Page 4)

4
REMOTE CONTROL
TIMER OUTDOOR
HEAT
SETTING
STATUS
PUMPDW
BOOSTER
QUIET
TANK
WATER OUTLET
C
C
SET
SELECT
CANCEL
ERROR
RESET
SETTING STATUS
SEARCH
PUMPDW FORCE CLOCK
CHECK
OFF /ON
MODE
HEATER QUIET OFF/ON
TIMER
HEATER
OPERATION
FORCE
HEATER
ACTUAL
TIMER 1
MONTUEWEDTHU FRI SAT SUN
SOLAR REMOTE
2 3 4 5 6
ON
OFF
• Some functions described in this manual may not be applicable to your unit.
• Consult your nearest authorized dealer for further information.
• For normal operation, the
ERROR
RESET
,
FORCE
and
PUMPDW
buttons are not in use.
1 OFF/ON Button 14 Quiet Operation OFF/ON Indicator
2 Operation LED 15 Backup Heater Enabled/Disabled Indicator
3 Operation Mode Button 16 Force Heater Request OFF/ON Indicator
4 Quiet Operation Button 17 Backup Heater Actual Operation (OFF/ON) Indicator
5 Backup Heater Enabling Button 18 Booster Heater Actual Operation (OFF/ON) Indicator
6 System Setting Mode Buttons 19 System Setting Mode OFF/ON Indicator
7 Timer Setting Group Buttons 20 System Status Check Mode OFF/ON Indicator
8 Force Heater Mode Button 21 System Pumpdown Mode OFF/ON Indicator
9 System Pumpdown Mode Button 22 Timer/Clock Setting Display
10 System Status Check Mode Buttons 23 External Thermo Controller Connected Display
11 Error Reset Button 24 Outdoor Ambient Temperature Display
12 Heat Mode OFF/ON Indicator 25 Water Outlet Temperature Display
13 Tank Mode OFF/ON Indicator
26
Solar Display
Notes:
• The current day and time need to be set when:
- The power is turned on for the fi rst time.
- After a long time has elapsed since the power was last
turned on.
• The current time that has been set will be the standard
time for all the Timer operations.
1. Press
CLOCK
.
2. Press or to set current day.
3. Press
SET
to confi rm.
4. Repeat steps 2 and 3 to set the current time.
REMOTE CONTROL PREPARATION
Setting Current Day and Time
16
1
22
21
10
17
18
19
20
24
9
5
25
3
8
4
7
2
15
14
12
13
6 11
23
26