Attaching the lens hood 2 3 1 2 – Panasonic DMCGM1LEF User Manual
Page 2
VQC9831 (ENG)
2
∫ Interchangeable Lens (H-X015)
•
Before attaching the lens hood, make sure to remove the lens cap. The lens hood cannot be attached
unless you remove the lens cap.
1
Rotate the decoration ring
A
in the direction of the arrow to remove it.
2
Align the mounting index
B
on
the lens hood with the mark on
the tip of the lens.
3
Rotate the lens hood in the
direction of the arrow until it
clicks into place, and align the
stop position
C
on the lens
hood with the index on the tip of
the lens.
∫ Attaching the decoration ring
•
Before attaching the decoration ring,
make sure to remove the lens cap.
1
Align the mounting position
D
on the decoration ring with a
position approximately 90x away
from the lens fitting mark
E
to
fit the decoration ring into place.
2
Rotate the decoration ring in the
direction of the arrow to align
the mounting position
D
on the
decoration ring with the lens
fitting mark
E
.
Attaching the Lens Hood
2
3
1
2
DMC-GM1L_VQC9831.book 2 ページ ２０１４年４月２４日 木曜日 午前１０時１０分