ALESIS MULTIMIX 16 User Manual

Page 46

USB2.0 Recording

Using the MultiMix USB2.0 with

CoreAudio on the Macintosh

To configure the MultiMix for use with CoreAudio:

1. Open the Mac’s “Audio MIDI Setup” utility.

2. Choose the “Alesis USB Audio Device” as both input and

output device.

3. To verify that the MultiMix USB 2.0 is connected to your Mac,

select the “Alesis USB Audio Device” under “Properties

For:” and then press “Configure Device.”

Mac OS X 10.4 or higher is
required by the MultiMix
drivers.