Scarlett SC-1139S User Manual

Page 5

www.scarlett-europe.com

SC-1139S

DRY IRONING

· The steam iron can be used on the dry setting with or without water in the water tank, however it is best to avoid

having the water tank too full while dry ironing.

· Turn the variable steam control to the minimum position.

· Select the setting on the temperature control dial best suited for the fabric to be ironed.

CAUTION: If the steam iron has been used for a long time, is hot and there is no water. Do not refill it with water
until the steam iron has cooled down.
BURST OF STEAM

· The burst of steam feature provides additional steam for removing stubborn wrinkles.

· Turn the temperature control dial to the

position.

· Turn the variable steam control to the maximum position.

· Press the powerful steam button to release the burst of steam.

NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button pressed for more than
5 seconds.
WHEN YOU FINISHED IRONING

· Set the temperature dial to the minimum position.

· Remove the mains plug from the wall socket.

· Stand the iron on heel rest.

CARE AND CLEANING
· Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.

· Do not use abrasive cleaners.
WATER TANK CLEANING

· Fill the half of the water reservoir.

· Set the temperature control to its maximum position.

· Insert the main plug into the wall socket.

· Allow the iron to heat up until the indicator light goes out.

· Unplug the steam iron.

· Holding the iron horizontally over the sink, change the steam control to the maximum position.

· Boiling water and steam will be ejected from the holes in soleplate with Impurities washed out.

· Move the iron over an old (preferably) piece of cloth. This to ensure that the soleplate will be dry during storage.

STORAGE
· Unplug the appliance from the power supply, empty the water tank (do it after each use) and allow steam iron

cool down completely.

· Wrap the cord around the heel rest.

· To protect the soleplate, place the steam iron in an upright position on its heel rest.

RUS