Panasonic ESED20 - Manual (Page 20)

20
3. Wash the head with water to wash out hair.
•
Do not use hot water.
•
If soap is not completely washed away, then a
white deposit can accumulate and prevent the
discs and the blades from moving smoothly.
•
Rinse the shaver head with the frame
removed.
4. Turn the switch off, wipe the appliance with a dry cloth
and dry it well.
Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the
switch on.
3. Rinse any debris thoroughly with water or lukewarm
water.
4. After turning the switch off, remove the frame and rinse
inside.
5. Wipe with a dry cloth and dry in a well-ventilated location.
3 4 5
Replacing the outer foil
We recommend replacing the outer foil [ H 9 ] every year and
the inner blade every two years. Remove the outer foil of the
shaver head [
H ] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel ( b ) on the blade
from the hooks ( a ) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
 
1 2
Replacing the file
The file lifetime is approximately 1 year (assuming a single use
every 2 weeks with approximately 10 minutes per use). We
recommend replacing the file about once a year.
1. Press down with your finger and release the file.
2. Align the
shaped part with the mark side and press
down.