Advent ADV10A User Manual

Page 24

TROUBLESHOOTING

PROBLEM

IR remote inoperative

Verify that the batteries in the remote are fresh.
Verify that the remote sensor eye is not obstructed.
If the monitor is set to M1, press the M1 button on the remote control. If the monitor
is set to M2, press the M2 button on the remote control. (See page 5.)

Disc won't play

No sound or distorted sound

Play starts, but then stops immediately

Insert a disc with the label side facing upwards.
Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and

MP3.

Both the unit and the disc are coded by region. If the regional codes don’t match, the
disc can’t be played.

Make sure your DVD is connected properly. Make sure all cables are securely
inserted into the appropriate jacks.
If you are using the 2-channel IR headphones, make sure you turn on the IR
headphone power, make sure the correct channel (A-B) is selected.
Make sure the Modulator is ON and the proper Frequency has been selected.
Make sure that unit is set to M1 when using Single Channel Headphones.

The disc is dirty. Clean it.
Condensation has formed. Allow player to dry out.

SOLUTION

AV Out

The unit provides an AV output for optional video monitor(s). This output will provide the AV signals that duplicate the picture/audio being
processed by the unit to an additional monitor or video display. Please see your installer for more information.