Remote control, Setting up the special functions, Remote control’s display – Panasonic WHMHF12D6E5 User Manual
Page 4: Remote control’s button, Buttons are not in use, Open cover for buttons selections, Press or to set current day. 3. press
4
SETTING UP THE SPECIAL FUNCTIONS
REMOTE CONTROL
• Some functions describe in this manual may not be applicable to your unit.
• Consult your nearest authorized dealer for further information.
• For normal operation, the
ERROR
RESET
,
FORCE
and
SERVICE
buttons are not in use.
REMOTE CONTROL’S DISPLAY
a Heat Mode OFF/ON Indicator
j
Timer/Clock Setting Display
b Tank Mode Indicator
k Outdoor Ambient Temperature Display
c Quiet Mode Indicator
l
Water Outlet Temperature Display
d Backup Heater Enabled/Disabled Indicator
m Backup Heater Actual (OFF/ON) Indicator
e Force Heater Request OFF/ON Indicator
n Booster Heater Actual (OFF/ON) Indicator
f
External Thermo Controller Connected Display
o System Defrost Operation OFF/ON Indicator
g Operation LED
p System Setting Mode OFF/ON Indicator
h Solar Display
q System Status Check Mode OFF/ON Indicator
i
Caution (Tank Temperature above 60°C) Indicator
r
System Service Mode OFF/ON Indicator
REMOTE CONTROL’S BUTTON
1
OFF/ON Button
6
Timer Setting Group Buttons
2
Operation Mode Button
7
Force Heater Mode Button
3
Quiet Operation Button
8
System Service Mode Button
4
Backup Heater Enabling Button
9
System Status Check Button
5
System Setting Mode Buttons
10
Error Reset Button
HEAT
TANK
QUIET
FORCE
HEATE
R
OPERAT
ION
BOOSTER
HEATER
ACTUAL
DEFROST
SETTING
STATUS
SERVICE
WATER OU
TLET
OFF
/ ON
TIMER
OUTD
OOR
C
C
C
Open cover for buttons selections.
TIMER
OUTDOOR
HEAT
SETTING
STATUS
SERVICE
BOOSTER
QUIET
TANK
DEFROST
WATER OUTLET
C
C
SET
SELECT
CANCEL
ERROR
RESET
SETTING
STATUS
SEARCH
SERVICE
FORCE
CLOCK
CHECK
OFF /ON
MODE
HEATER
QUIET
OFF/ON
TIMER
HEATER
OPERATION
FORCE
HEATER
ACTUAL
TIMER
1
MONTUEWEDTHU FRI SAT SUN
SOLAR REMOTE
2 3 4 5 6
ON
OFF
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
1
6
5
10
3
7
8
4
9
2
Notes:
• The current day and time need to be set when:
- The power is turned on for the fi rst time.
- After a long time has elapsed since the power was last turned on.
• The current time that has been set will be the standard time for all
the Timer operations.
1. Press
CLOCK
.
2. Press
or
to set current day.
3. Press
SET
to confi rm.
4. Repeat steps 2 and 3 to set the current time.
REMOTE CONTROL PREPARATION
Setting Current Day and Time
F568297_YS0212-1.indb 4
F568297_YS0212-1.indb 4
13-Feb-12 9:35:59 AM
13-Feb-12 9:35:59 AM