ASA Electronics MS-306 - Manual (Page 4)

7. PROGRAM INDICATORS
Indicates tape direction for reference to the fast forward/reverse buttons. Further indicates the
direction (side) of the tape currently playing. To reverse the tape direction and play the other
side of the cassette, lightly press both << and >> (5) buttons at the same time. The change of
direction will be shown by the indicators.
8. MUTE SWITCH
Press the switch “IN” to activate the audio mute circuit. Press the switch again to return to the
previous output level.
9. BALANCE CONTROL
Clockwise rotation shifts balance to the right speakers and counter-clockwise shifts balance to
the left speakers. Detent position in the center balances the left and right speakers.
10. LO/DX SWITCH
Press the switch to the “IN” position, local reception is gained and by pressing once more to
“OUT” position, the antenna will be able to work on distant reception.
11. MONO/STEREO SWITCH
The Mono position of the switch is used when the FM stereo signal has become weak and begins
to switch the stereo light ON and OFF. For normal operation set the switch in the “IN” position for
FM stereo.
12. LOUDNESS SWITCH
This control compensates for the loss of high and low frequencies when the volume control is
adjusted to a low level.