Audiovox VOH683 - Manual (Page 12)

-12-
128-6115
12 of 16
Fig. 2
Battery Installation (Fig.2)
1. Place two alkaline AAA batteries in the
Headphone’s battery compartment making sure
that the battery polarity is correct.
2. Replace the battery cover.
HEADPHONE OPERATION
1. Turn the headphone volume down off before
turning on the power. Turn on the headphone
power then increase the headphone volume to a
comfortable level.
2. Before switching between channels A and B,
remove headphones and turn the volume down
because signal of the other channel could be
louder.
IMPORTANT: To prevent possible ear damage,
Read the following Carefully!
1. INFRARED PICKUP SENSORS – (Receives
signals from transmitter)
2. BATTERY COVER
3. VOLUME CONTROL
4. POWER SWITCH
5. POWER INDICATOR LED
6. CHANNEL A/B SWITCH
7. AUTO ON/OFF MICRO SWITCH
Controls and Indicators (Fig.1)
Auto ON/OFF Micro Switch is activated when headphones are
placed on head (shown below)
1
2
5
3
L
R
4
6
7
Fig. 1