ASA Electronics DVDVCP01 User Manual

Page 21

VIDEO

LAYER

PERATION

¥ Press [PLAY] button for 2 seconds or [A.REPEAT] button in the

playback mode. The ÒA. RPTÓ lamp on the front panel will
illuminate. The VCP cycles through the following modes and the
ÒA. RPTÓ lamp lights green. The tape will play to the end, rewind
to the beginning and play again.

PLAYBACK ➠ THE END OF THE TAPE ➠ REWINDING ➠ PLAYBACK..

¥ Other controls have no effect during the Auto Repeat mode.

¥ To exit the Auto Repeat mode, press [PLAY] button for 2 seconds

or [A.REPEAT] button again. The ÒA. RPTÓ lamp will turn off and
stop the tape.

AUTO REPEAT PLAYBACK

Before you play a video cassette tape, be certain to read this
information on the proper care and use of video cassettes.

Only use video cassettes that bear the VHS mark:

Inserting video cassettes

Firmly insert the cassette into the cassette compartment with the
label up. An inverted cassette cannot be inserted.

Removing video cassettes

Press [EJECT] button and the VCP will eject the tape. Pull the
cassette out gently.

USING VIDEO CASSETTES

¥ Audio-visual material may include

copyrighted works which must not
be recorded without authorization
of the copyright owner.

¥ Do not insert fingers or any foreign

object beyond the door flaps of
the cassette compartment; this
could lead to injury or equipment
damage.

¥ Do not attempt to insert a video

cassette if the unit is not powered.

OTE

Video player operation