Arcam DV88 - Manual (Page 17)

DV88 PLUS
16
DV88 PLUS
17
Technical specifications
General
Power Requirements
115V or 230V AC, set by voltage selector switch on rear panel
Power consumption <30W
Dimensions 430mm x 90mm x 280mm
Weight net: 4.9kg
packed: 6.5kg
Video outputs
Composite video
1 x gold plated phono. 1V pk-pk in 75Ω
S-Video 1 x 4-pin mini-DIN. Y 1V pk-pk in 75Ω, C 0.3V pk-pk in 75Ω
Component video Interlaced or Progressive (525P)
3 gold plated phono sockets. Y 1V pk-pk in 75Ω, Pb 0.7V pk-pk in 75Ω,
Pr 0.7V pk-pk in 75Ω.
SCART socket with RGB video All 0.7V in 75Ω, composite video 1V in 75Ω, and stereo audio.
Auto switching of TV with aspect ratio control
Audio outputs
Analogue audio outputs
Two pairs of stereo outputs on gold plated phono sockets
Output level 2.2V rms at 0dB signal
Frequency response 20Hz to 20kHz (+0.1db, –0.5dB)
THD+N <0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
S/N 105dB, measured 20Hz–20kHz, unweighted
Digital audio output (IEC958) PCM/Dolby digital/MPEG/DTS on gold plated phono (coax) and TOSLINK (optical)
Accessories supplied
CR-314 remote control
2 x AAA batteries
mains lead
E&EO
Continual improvement policy
Arcam has a policy of continual improvement for its products.
This means that designs and specifications are subject to
change without notice.
NOTE: All specification values are typical unless otherwise
stated.