Aerielle Technologies i2i-RDS - Manual (Page 7)

7
Tip: The best station for transmitting is one
that may not be perfectly clear but also
has clear or weak stations to either side of
it in the FM band.
Using the mobile FM transmitter
presets
To use the mobile FM transmitter presets:
1 Tune the transmitter to the desired FM frequency
using the tune up and tune down buttons.
Firmly press and hold one of the three preset buttons on
the front of the mobile FM transmitter for two seconds.
This stores the station in memory. The display will blink
briefly. A small indicator bar appears on the display
opposite the newly programmed preset button.
Caution: Do not watch the display while
driving.
2 Repeat steps one and two to store two additional
stations with the two remaining buttons.
Tip: When the mobile FM transmitter is
turned off and restarted, it tunes to the
last frequency used and the preset stations
are in memory.
i2i-RDS_08-400_Final revised.fm Page 7 Jan. 28, 2008