ARRI Laptop Camera Controller Arriflex LCC - Manual (Page 4)

Arriflex LCC Basics, 2/97, Page 4
3. The Counters Window
The Counters/Info
Window The Timecode
Window The Small Camera
Report Window
Clicking on any of the Window buttons will open the respective window. These windows contain
additional status information and advanced control capabilities.
Counters
Depending on the camera used, the Counters window displays the following counters that are also
available on the camera LCD display: Take, Total, Magazine, Battery, Gate Filter.
In addition it displays the following status information: Frames, Program, Arriglow.
Buttons
Mode Clicking this button will change the mode of the LCD display on the camera.
Reset Total Clicking this button will reset the TOTAL counter on the camera to “0000”.
Run at 1 fps Clicking this button will make the camera run at 1.000 fps crystal speed.
+/-0.001 fps Each time one of these buttons is clicked, the current camera speed will change
by 1/1000 fps. These buttons can be used to fine tune the fps rate while shooting
a monitor.