Nstallation – Antec TRUEPOWER QUATTRO TPQ-1200 User Manual
Page 6
I
NSTALLATION
:
1.
Install the TPQ-1200 PSU into your case with the four screws provided.
2.
Connect the 24-pin main power connector to your motherboard.
3.
Connect the 8-pin or 4-pin ATX12V connector for the CPU to the appropriate connector on your
motherboard. If your motherboard has an 8-pin socket with a cover on some of the openings, we
recommend that you remove the cover and use the 8-pin connector.
Note: Please also refer to your motherboard user’s manual for any special instructions.
4.
Connect the cables from the cable pack to the socket on the power supply as needed. If you are going to
plug the additional PCI-E cable into the PSU, it should go into the red socket. If the red socket is not being
used for PCI-E, then it can be used for another cable from the pack that accompanies the PSU.
- Neo HE430 (6 pages)
- PHANTOM 350 (24 pages)
- NEOPOWER 430 (6 pages)
- HCG-750 (7 pages)
- SmartPower 4 Serial-ATA (1 page)
- VP450 (6 pages)
- Basiq 430 (1 page)
- 2.0 (4 pages)
- Sonata Elite (11 pages)
- SOLO UCC 13# 0761345-08500-7 EU (1 page)
- Sonata Designer UCC13# 0761345-08146-7 EC (1 page)
- SMARTPOWER 2.0 (4 pages)
- HCG-400 (7 pages)
- 550 (1 page)
- EARTHWATTS EA-350 (7 pages)
- Veris Fusion Remote Max (5 pages)
- Basiq 550 Plus (1 page)
- Veris Fusion v2 (6 pages)
- UCC 13#: 0761345-77203-7 (1 page)
- TruePower Trio 430 Wat (1 page)
- NSK 1380 (5 pages)
- NSK 4480 (8 pages)
- Basiq BP430 (4 pages)
- 500 (34 pages)
- II (7 pages)
- EA-450 (7 pages)
- EA-380D (6 pages)
- EA-650 (7 pages)
- TruePower Quattro 1000W (1 page)
- EA-380 (4 pages)
- Nine Hundred Two UCC13# 0761345-15920-3 US (1 page)
- HCP-750 (9 pages)
- HCG-520 (7 pages)
- EARTHWATTS 350 GREEN EA-350 (6 pages)
- HCG M SERIES HCG-620M (8 pages)
- HCG M SERIES HCG-520M (8 pages)
- HCP-1200 (9 pages)
- HCG-620 (7 pages)
- EARTHWATTS 750 (7 pages)
- TRUEPOWER 2.0 (6 pages)
- HCG-900 (7 pages)
- CP-850 (1 page)
- TP-750 Blue (1 page)
- New Solution Series (8 pages)