Sony DAV-HDX585 User Manual

Page 34

Gettin

Star

ted

Press

C/c to select the speaker

formation image as the speakers are
actually positioned, then press

For details, see “Getting Optimal Surround
Sound for a Room” (page 80).

Connect the calibration mic (supplied)
to the A.CAL MIC jack on the front
panel.

Set up the calibration mic at ear level using
a tripod, etc. (not supplied).
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.

Press

C/c to select [YES], then press

[AUTO CALIBRATION] starts.
Be quiet during the measurement.

Note

• Loud test sounds are output when [AUTO

CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbors.

• Before [AUTO CALIBRATION], install the

surround amplifier in the appropriate location. If
you install the surround amplifier in an improper

location, such as another room, proper
measurement will not be obtained.

• The environment of the room in which the

system is installed may affect measurements.
When the measurements differ considerably
from the status of the speaker installation,
perform the speaker settings manually by
following “Settings for the speakers” (page 64).

Unplug the calibration mic, press

C/c

to select [YES], then press

Quick Setup is finished. All connections
and setup operations are complete.

To quit the Quick Setup

Press

DISPLAY in any Step.

To recall the Quick Setup display

Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.

Press

DISPLAY while the system is

in stop mode.

The Control Menu display appears on the
TV screen.

Press

X/x to select

[SETUP],

then press

The options for [SETUP] appear.

Press

X/x to select [QUICK], then press

The Quick Setup display appears.

Calibration mic

9 4 ( 9 9 )

CUSTOM

DVD VIDEO

T 0 : 0 1 : 0 8

1 ( 1 )

QUICK