AEG KO-LAVAMAT 88840 - Manual (Page 43)

Operating Instructions
43
Additional rinse cycle and water cooling
You can combine the additional rinse and water cooling functions.
Set the two functions as described under "Additional rinse cycle" and
"Water cooling".
Variomatic spin
The variomatic spin is integrated into the final spin. The washing does
not cling to the side of the drum as much and can be taken out more
easily. This can be set with the COTTONS/LINEN, EASY-CARES pro-
grammes.
To set Variomatic Spin:
0 1. Turn the programme selector to SHORT SPIN.
2. Press and hold the STAIN button for at least 5 seconds.
When the button has been pressed for 5 seconds, the END light flashes
on the Programme Progress display for 5 seconds.
3. While END is flashing, release the STAIN button. When it stops flashing,
Variomatic Spin has been set. It remains set until cancelled again.
4. If you want to check whether Variomatic Spin has been set:
– Turn the programme selector to SHORT SPIN.
– Press the STAIN button briefly.
If the END light flashes on the display, Variomatic Spin is set.
To cancel Variomatic Spin:
0 1. Turn the programme selector to SHORT SPIN.
2. Press and hold the STAIN button for at least 5 seconds.
As soon as the button is pressed, the END light flashes on the Pro-
gramme Progress display. After 5 seconds, the END light stops flashing
and remains continuously lit for another 5 seconds.
3. While END is continuously lit, release the STAIN button. When END is
no longer lit, Variomatic Spin has been cancelled.