Sony CDX-M610 - Manual (Page 10)

10
CD Player
CD/MD Unit (optional)
In addition to playing a CD with this unit
alone, you can also control external CD/MD
units.
If you connect an optional CD unit with the
CD TEXT function and the custom file
function, the CD TEXT information will appear
in the display when you play a CD TEXT disc.
Listening to a CD
(with this unit only)
1
Press (OPEN/CLOSE) of the card remote
commander and insert the CD.
Playback starts automatically.
Labeled side up
2
Press (OPEN/CLOSE) of the card remote
commander to close the front panel.
If a CD is already inserted, press (SOURCE)
repeatedly until “CD” appears to start
playback.
Elapsed playing time
Note
To play back an 8 cm (3 in.) CD, use the optional
Sony compact disc single adapter (CSA-8).
When the last track on the CD is
over
The track number indication returns to “1,”
and playback restarts from the first track of the
CD.
To Press
Stop playback (OFF)
Eject the CD (OPEN/CLOSE) then Z
Playing a CD or MD
(with optional CD/MD unit)
1
Press (SOURCE) repeatedly to select
“CD” or “MD.”
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
All the discs in the current CD/MD unit is
played from the top.
Changing the display item
Each time you press (DSPL) during CD, CD
TEXT disc or MD playback, the item changes
as follows:
V
Disc number* 1 /Track number/
Elapsed playback time
V
Disc name* 2 /Artist name* 3
V
Track name* 4
* 1 While an optional CD/MD unit is connected.
* 2 If you have not labeled the CD or CD TEXT disc
(“Labeling a CD” page 13), or if there is no disc
name prerecorded on the MD, “NO D.Name”
appears momentarily in the display.
* 3 If you play a CD TEXT disc, the artist name
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name.)
* 4 If the track name of a CD TEXT disc or MD is not
prerecorded, “NO T.Name” appears
momentarily in the display.
Track number CD indication