Sony KLV-23M1 - Manual (Page 35)

35
Connecting and Setting the TV
IN
HDMI to DVI-HDTV
adapter or cable
(not supplied)
AUDIO-L (white)
AUDIO cable
(not supplied)
Digital Satellite Receiver
Rear of TV
AUDIO-R (red)
When connecting to a Digital Satellite Receiver’s DVI-HDTV
connector
If the Digital Satellite Receiver does not have an HDMI connector, you can
connect the TV’s HDMI IN connector to the Digital Satellite Receiver’s
DVI-HDTV OUT connector using the HDMI cable (not supplied).
1 Using a HDMI to DVI-HDTV adapter or cable (not supplied), connect
the Digital Satellite Receiver’s DVI-HDTV OUT connector to the TV’s
HDMI IN connector.
Use the HDMI 4 IN connection.
Note
The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be
connected to provide sound when an HDMI to DVI-HDTV adapter is used.
2 Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Tip
Use VIDEO 4 on the remote control to select HDMI 4 IN to watch the digital satellite receiver
input.