Settings for the sound – Sony DMX-DVD User Manual
Page 41

41
MULTI-DISC RESUME (DVD VIDEO only)
Switches the Multi-disc Resume setting on or off.
Resume playback can be stored in memory for up to 6
different DVD VIDEOs.
CONTROL FOR HDMI
This setting is automatically turned on.
LANGUAGE FOLLOW
Switches the languages of the DVD player
to the same as the current TV OSD
language.
~
• Turn off any display before using this function.
• The OSD language for player will not change if
the TV’s language is not supported.
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the sound
according to the playback and connection conditions.
Select “AUDIO SETUP” in the Setup Display. To use the
display, see “Using the Setup Menu” (page 37).
The default settings are underlined.
AUDIO DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned down
when playing a DVD that conforms to “AUDIO DRC.”
AUDIO (HDMI)
This setting is automatically set to PCM.
ON
Stores the resume setting in
memory for up to 6 discs.
OFF
Does not store the resume
setting in memory. Playback
restarts at the resume point
only for the current disc in the
player.
ON
Sets this function on.
ON
Switches this function on.
OFF
Switches this function off.
STANDARD
Normally, select this
position.
TV MODE
Makes low sounds clear
even if you turn the volume
down.
WIDE RANGE
Gives you the feeling of
being at a live performance.
PCM
Converts Dolby Digital, or
96kHz/24 bit PCM signals to
46kHz/16 bit PCM.
AUDIO SETUP
AUDIO DRC:
STANDARD
AUDIO (HDMI):
PCM