Asus P4T-M - Manual (Page 18)

18 ASUS P4T-M Quick Setup Manual
8) Power Supply Connectors (20-pin block ATXPWR)
(6-pin AUXPWR)
(4-pin ATX12V)
These connectors connect to an ATX 12V power supply. Each plug from the
power supply will only insert in one orientation because of the different hole
sizes. Find the proper orientation and push down firmly making sure that the
pins are aligned. An auxiliary power supply may be needed depending on your
system configuration.
IMPORTANT: Make sure that your ATX 12V power supply (minimum recom-
mended wattage: 230 watts; 300W for a fully-configured system) can supply at
least 20 amperes on the +5-volt lead and at least 720mA on the +5-volt standby
lead (+5VSB). Your system may become unstable/unreliable and may experi-
ence difficulty in powering up if your power supply is inadequate. For Wake-
On-LAN support, your ATX power supply (minimum recommended wattage:
230watts) must supply at least 720mA +5VSB.
P4T-M
P4T-M ATX &
Auxiliary Power Connectors
ATX12V
+12V DC
COM
+12V DC
COM
Pin 1
ATXPWR
+5VDC
+5VDC
-5VDC
COM
COM
COM
PS_ON#
COM
-12VDC
+3.3VDC
COM
+3.3VDC
+12VDC
+5VSB
PWR_OK
COM
+5VDC
COM
+5VDC
+3.3VDC
Pin 1