beautypg.com

The rear ports, Connecting the telewell tw-640 – Addtron Technology TW-640 User Manual

Page 6

background image

Quick Start Guide

5

The Rear Ports

Power
(jack)

Connect the supplied power
adapter to this jack.

Global
(RJ-45
connector)

Connect an UTP Ethernet cable
or crossover cable to this port
when connecting to the Internet
or making other WAN
connections.

Local 1- 4
(RJ-45
connector)

Connect an UTP Ethernet cable
to this four ports when
connecting to a LAN of
10Mbps or 100Mbps such as an
office or home network.

Connecting the TELEWELL TW-640

Refer to the following to connect the TELEWELL TW-640 to a WAN
(Wide Area Network) and a LAN (Local Area Network):

1. Connect the TELEWELL TW-640 as shown below.

2. Power on the device.

3. Ensure the Power, LAN, and WAN LEDs are lit.