Adjusting the picture – Sony PFM-510A1WU User Manual

Page 22

(GB)

Notes

• CHROMA and PHASE controls do not function with

RGB signal.

• PHASE control does not function with component

signal.

• PHASE control does not function with PAL color

source.

• Do not change the CHROMA/PHASE (NTSC only)

level when the selected signal is not NTSC or PAL.
Although it gives no effect to the current picture, it
does affect the picture of the NTSC or PAL signal
which is input later.

Restoring the PIC CONTROL Menu
Items to Original Settings

In the PIC CONTROL menu, Press

M/m to move

the cursor (B) to “RESET” and press ENT.
The following menu appears on the monitor
screen.

R E S E T :

N O

S E L E C T

C A N C E L

ENTER

Press

M/m.

“NO” changes to “YES”.

R E S E T :

Y E S

S E L E C T

C A N C E L

ENTER

Press ENT.
The PIC CONTROL menu items are restored.

To cancel the reset function, press the MENU button
before pressing the ENT button.

Adjusting the Picture

Adjusting the Picture

While watching the picture, you can adjust contrast,
brightness, chroma, and phase to suit your taste. The
adjustments can be carried out for each input signal
separately. You can also store the adjusted levels in
memory.

Adjusting the Contrast, Brightness,
Chroma, and Phase

Press MENU so that the main menu appears on the
monitor screen and select the “CONTRAST”,
“BRIGHTNESS”, “CHROMA”, or “PHASE” from
the PIC CONTROL menu with the

M/m buttons.

CONTRAST

Select the “CONTRAST” with the

M/m buttons and

press the ENT button.
Adjust the contrast with the

M/m buttons in the range

from MIN (0) to MAX (+100).

M: to increase picture contrast
m: to decrease picture contrast

BRIGHTNESS

Select the “BRIGHTNESS” with the

M/m buttons and

press the ENT button.
Adjust the brightness with the

M/m buttons in the

range from MIN (–50) to MAX (+50).

M: to make overall picture greenish
m: to make overall picture purplish

CHROMA

Select the “CHROMA” with the

M/m buttons and

press the ENT button.
Adjust the chroma with the

M/m buttons in the range

from MIN (–50) to MAX (+50).

M: to increase color intensity
m: to decrease color intensity

PHASE

Select the “PHASE” with the

M/m buttons and press

the ENT button.
Adjust the phase with the

M/m buttons in the range

from MIN (–50) to MAX (+50).

M: to make overall picture greenish
m: to make overall picture purplish