Sony KLV-23HR2 - Manual (Page 18)

18
Installing and Connecting the TV
Connecting a Digital Satellite Receiver
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the Digital Satellite Receiver’s
Y, P
B
and P
R
jacks to the Y, P
B
and P
R
jacks on the TV. Use the VIDEO 3
IN connections.
Note
Component video (Y, P
B
, P
R
) connection is necessary to view 480p, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of
1,280 dots
× 768 lines.
2
Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, P
B
and P
R
jacks do not provide audio, so audio cables must be connected to
provide sound.
VIDEO OUT
TYPE
1
L1 L2
Y
Pb
Pr R1
AUDIO OUT
OPTICAL
DIGITAL
AUDIO
OUT
R2
2
COMPONENT OUT
(1080i/720p/480p/480i)
S VIDEO
OUT
Digital Satellite Receiver
(e.g. SAT-HD200, SAT-HD300, etc.)
AUDIO cable
(not supplied)
Rear of TV
Component video
cable (not supplied)
P
R
P
B
Y
AUDIO-R (red)
AUDIO-L (white)