Specifications – Audiovox AVR-1228 User Manual
Page 39

Specifications
System
VHS
Video signal
NTSC color
Channel coverage
VHF Channel 2-13
UHF Channel 14-69
CATV Channels A1-A5, A8, A-W,
W+1-W+84
VHF output signal
Channel 3 or 4 (selectable)
Video
Input: Video line in
Phono-type connector 1.0V (p-p)
75 ohms unbalanced, sync.negative
Output: Video line out
Phono-type connector 1.0V (p-p)
75 ohms unbalanced, sync.negative
Signal to noise ratio
More than 43dB (SP)
Horizontal resolution
220 lines
Audio
Input: Audio line in
Phono-type connector more than 47K
ohms
-8.8 dBm, unbalanced
Output: Audio line out
Phono-type connector less than 1.5K
ohms
-7.8 dBm (More than 47K ohms
load), unbalanced
Frequency response
Normal: 100Hz-l0KHz (SP)
Signal to noise ratio
Normal: more than 40 dB
Audio distortion
Normal: less than 3% (SP)
Tape transport
Tape width
12.65 mm (1/2”)
Tape speed
SP: 33.35 mm/sec
EP: 11.12 mm/sec
Maximum recording time 480 min, with T-160 tape (EP)
Rewind/fast forward time
Approx 3 min (T-120 tape)
General
Power requirements
120 V, 60 Hz AC only
Power consumption
17 W
Dimensions
Set size (W x H x D)
14.17 x 3.54 x 10.78 inches
Carton size (W x H x D)
18.07 x7.67 x 14.13 inches
Weight (gross)
10.7 pounds
AUDIOVOX Video Cassette Recorder User’s Guide
34