beautypg.com

Settings for the display, Screen setup – Sony HCD-DX150 User Manual

Page 73

background image

Se
tting

s an

d A

d

ju

stme

nts

73

GB

Choose settings according to the TV to be
connected.

Select [SCREEN SETUP] in the Setup Display.
To use the display, see “Using the Setup
Display” (page 71).
The default settings are underlined.

x

[TV TYPE]

Selects the aspect ratio of the connected TV (4:3
standard or wide).
The default setting varies, depending on the
country model.

• Depending on the DVD, [4:3 LETTER BOX] may be

selected automatically instead of [4:3 PAN SCAN] or
vice versa.

x

[COLOR SYSTEM] (Asian, Australian,

and Saudi Arabian models only)

Select the color system when you play a VIDEO
CD.

• You cannot change the color system of the disc itself.

• On Asian and Australian models, you can change the

color system of this unit according to the connected
TV.

x

[SCREEN SAVER]

The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a CD or DATA CD (MP3
audio) for more than 15 minutes. The screen saver
will help prevent your display device from
becoming damaged (ghosting). Press H to turn
off the screen saver.

Settings for the Display

[SCREEN SETUP]

[4:3 LETTER
BOX]

Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the screen.

[4:3 PAN SCAN]

Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.

[16:9]

Select this when you connect a
wide-screen TV or a TV with a
wide mode function.

SCREEN SETUP

TV TYPE:
SCREEN SAVER:
BACKGROUND:

4:3 LETTER BOX

ON

JACKET PICTURE

BLACK LEVEL:

ON

OFF

BLACK LEVEL

(COMPONENT OUT)

:

4:3 OUTPUT:

FULL

Note

[AUTO]

Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select [AUTO].

[PAL]

Changes the video signal of an
NTSC disc and outputs it in the
PAL system.

[NTSC]

Changes the video signal of a PAL
disc and outputs it in the NTSC
system.

Note

[ON]

Turns on the screen saver.

[4:3 PAN SCAN]

[4:3 LETTER BOX]

[16:9]

continued