Sony PCV-RS311 - Manual (Page 123)

the new drive to the drive holder.
10. Realign the drive holder with the tracks on the inside of the chassis and slide the drive holder in completely.
11. Reinsert the drive holder screw and tighten to lock the drive holder back into position.
12. Connect the second drive connector to the new drive. Orient the connector to align pin 1 on the red side of the
ribbon cable with pin 1 on the new drive.
13. Connect the second power connector to the new drive, following the instructions supplied with the drive.
Replacing the driv e holder
14. Replace the cover. See Replacing the cover .
15. Reconnect the power cord to your computer.
Page 123