Sony HES-V1000 - Manual (Page 8)

STEP2
Connecting the Power Cord
STEP3
Easy Setup
ETHER WAN
LAN1
LAN2
LAN3
PUSH/OPEN
CONTROL S IN/ IR IN
R
R-AUDIO-L VIDEO
IN 1
OUT
S VIDEO
Y P B P R
OPTICAL COAXIAL
L
DIGITAL OUT PCM/DTS/ DOLBY DIGITAL
HDMI OUT
LINE
AUDIO OUT COMPONENT VIDEO OUT
AC IN
LAN(10/100)
to AC outlet
Power cord
Server
Connect the power cord last, after all connections are
complete.
1. Connect the power cord to the AC IN terminal on
the rear of the server.
2. Connect the other end to an AC outlet.
Make the basic settings to start using the server.
1. Turn on the TV.
2. Switch the TV’s input to the line connected to
the server.
3. Press on the server.
Easy Setup starts.
Select [Start] to proceed.
4. Select the option to access music and movie
related date.
5. Set [Music Server function] to [On].
DHCP is set automatically.
When using a fixed IP address, refer to
“Changing the Server Settings” in the
Operating Instructions.
Easy Setup steps you through the basic setup.
You can manually change the configurations later in the Settings category.
- Date and Time Settings
- All Media Guide Settings
- Music Server Settings
RETURN Finish
Easy Setup
Start
Set the Music Server functions.
If you are not using select [Off].
RETURN Return
Easy Setup - Music Server Settings 3/4
Off On