Sony KDL-32LL150 - Manual (Page 7)

Getting Started
7
Locating Inputs and Outputs
Item Description
1 PC IN
(RGB/AUDIO) Connects to a personal computer's video and audio output connector. Can also be
connected to other analog RGB equipment. See “PC Input Signal Reference Chart”
on page 39 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC's resolution and timing. See
page 11 for information on how to setup your PC to this TV.
2 VIDEO IN 1/
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
L (MONO)-
AUDIO-R This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT 1). For composite use, connect the yellow
jack to Y/Video for video and use audio L (mono) and R for audio signal. For
component connection, use Y, P
B
, P
R
for video signals and also connect the audio L
(mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1
when VIDEO 1 or COMPONENT 1 is connected.
To set to auto detection, press MENU and go to the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
3 COMPONENT
IN 2
(1080p/1080i/
720p/480p/480i)/
L-AUDIO-R Component video provides better picture quality than the S Video and composite
video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
4 AUDIO OUT
(FIX) L/R Connects to the left and right audio input jacks of your analog audio equipment.
You can use these outputs to listen to your TV's audio through your stereo system.
P R
P B
Y
VIDEO
RGB
(MONO)
VIDEO IN
AUDIO
L
PC IN
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
L
R
AUDIO
R
IN
AUDIO
OUT
(FIX)
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
1 1 2 3
CABLE/ANTENNA
1
6
2 3 4 5
7
8
AUDIO
R
VIDEO
(MONO)
L
IN
VIDEO IN
2
2
S VIDEO
0
9
5
Side Panel Rear Panel
(Continued)