AT&T E2115 - Manual (Page 9)

7
Getting Started
Battery installation & charging
After installation, place the handset in the base and allow to charge for 15 hours before
use. You can keep batteries charged by returning the handset to the base after each use.
When batteries are fully depleted, a recharge takes about 10 hours. Average talk time on a
fully charged battery is about six hours depending on environmental conditions, standby
time is approximately four days.
Insert supplied
battery
Place handset in base to charge
for 15 hours before first use.
Low battery indicator
Return handset to base to recharge
when this symbol flashes. (Handset
will beep when battery is low.)
Caution: Use only supplied
rechargeable battery or AT&T
replacement battery model
2419/2420 (SKU 00578).
Insert top
tabs first
Press down to
click in place
Press coin into slot on
base of handset to
release latch, then
remove battery cover.
LOW BATTERY
91-005622-030-000_E2115 CIB_R1.qxd 12/21/2004 11:05 AM Page 7